Screen Printed Hybrid American Flag Heat Transfers

Application Instructions

Application Instructions

• DO NOT USE A TEFLON SHEET OR ANY KIND OF COVER***
• MUST USE TRADITIONAL HEAT PRESS***

1. Set heat press to required temperature and pressure.
2. Once temperature is reached , press the bottom platen for 5-10 seconds. (only for first press)
3. Set and align garment , then press for 5 seconds to remove moisture and wrinkles.
4. Set and align transfer , press for required time.
5. Peel transfer , for hot peel right away, for cold peel wait at least 30 seconds or until room temperature is reached.

*** Always do a test run to make sure everything is good we are not responsible for damaged garments***

Care Instructions

• Wash Cold Inside Out to avoid abrasion
• Best if Hang Dry or No Heat if Must Tumble Dry Low or no Heat
• Do Not Bleach
• Do Not Iron Imprint/Transfer
• Do Not Dry Clean
• Best Not to use fabric softener