Description
Low-Temperature Dye-Blocking Heat Transfers Gang Sheets print multiple full-color designs on one press-ready sheet at just 260°F to 270°F, with every color included at once. A dye-blocking layer sits beneath the print, so sublimated polyester, patterned polyester, and technical stretch fabrics come out clean without scorch marks. There is no color limit, no weeding, and no stiff edge around the artwork, so detailed logos, gradients, and small text stay sharp on fabrics that would ruin an ordinary transfer.
The barrier is an invisible layer under the color that helps reduce dye migration, while the low-cure adhesive bonds at a temperature gentle enough for heat-sensitive garments. Dye from sublimated and patterned polyester is less likely to move into the design, so whites stay cleaner and bright colors stay vivid. A white backing under the color keeps artwork vivid on both light and dark garments, and the print stretches and rebounds without cracking through regular wear. Spot-color matching keeps brand and team colors consistent across reorders, and metallic colors are available at no extra cost.
Order a completed gang sheet in one of three sheet sizes: A5 5.8 x 8.3 in, A4 8.3 x 11.7 in, or A3 11.7 x 16.5 in. Arrange multiple designs inside the sheet you order and upload the finished sheet file in Upload Gang Sheet mode. There is no online builder; every sheet presses in a single application, so one sheet can carry a run of logos or a mix of graphics for the same job.
These transfers suit patterned polyester shirts and sportswear, sublimated polyester prone to dye migration, and technical stretch fabrics such as performance wear and tri-blends, plus water-resistant outer layers that still take a press. They also handle caps where the design does not cross a seam. They are not for fabrics that are 100 percent waterproof, where a promotional transfer is the safer choice. Press a sample first when you change fabrics or settings.
Application takes 12 to 15 seconds at 260°F to 270°F with medium-firm pressure at 30 to 40 psi, then a hot peel. Use an air-operated or manual heat press, not a domestic iron, a craft press, or any press without adequate pressure settings. Supply one print-ready gang-sheet PDF with fonts outlined and fine lines at 0.6 pt or heavier, and every file is reviewed before printing. Production runs 1 to 2 business days.
Pricing
Per-sheet retail prices below show how unit cost falls as quantity rises. Find your sheet size and quantity, then order in the configurator. It calculates your exact total live, and cart and checkout totals apply. Minimum 10 sheets per design. Request a Quote for help sizing a run.
| Sheet size |
10 |
20 |
50 |
100 |
200 |
300 |
500 |
1000 |
2500 |
5000+ |
| 5.8 x 8.3 in (A5) |
$7.84 |
$6.71 |
$4.98 |
$3.42 |
$2.77 |
$2.52 |
$2.37 |
$2.25 |
$2.18 |
$2.14 |
| 8.3 x 11.7 in (A4) |
$11.94 |
$10.02 |
$7.85 |
$5.43 |
$4.49 |
$4.12 |
$3.88 |
$3.72 |
$3.63 |
$3.54 |
| 11.7 x 16.5 in (A3) |
$20.26 |
$16.83 |
$13.69 |
$9.56 |
$7.98 |
$7.36 |
$6.97 |
$6.72 |
$6.57 |
$6.43 |
Volume discounts apply automatically. Final totals calculate live in the configurator. Chart shows retail per-sheet prices; live ACE totals apply at checkout.
Need a larger quantity? Get a custom quote!
Request a Quote
FAQ
Frequently Asked Questions
What is a low-temperature dye-blocking gang sheet?
Low-Temperature Dye-Blocking Heat Transfers Gang Sheets hold multiple full-color designs on one press-ready sheet for heat-sensitive fabrics. You upload one completed sheet file sized to the sheet you order, and the whole sheet presses with a low 260-270F application and a dye-blocking layer underneath.
How do I order a gang sheet?
Choose a sheet size (A5, A4, or A3), set the quantity, upload your completed gang-sheet file, and add any notes in Details and Comments. Use Upload Gang Sheet mode; there is no online builder, so arrange your designs before uploading.
What sheet sizes can I order?
Three sheet sizes: A5 5.8 x 8.3 in, A4 8.3 x 11.7 in, and A3 11.7 x 16.5 in. Arrange your artwork within the selected sheet dimensions before uploading.
What is the minimum order?
Minimum 10 sheets per design. The configurator enforces the live gang-sheet minimum.
How does quantity pricing work?
Order the quantity of sheets you need. Unit cost steps down at 20, 50, 100, 200, 300, 500, 1000, 2500, and 5000 sheets, so larger runs cost less per sheet. Final totals calculate live in the configurator.
Can I arrange multiple designs on one sheet?
Yes. Arrange multiple designs, sizes, and placements within the selected sheet area. The sheet shares one press application across every design on it.
Which fabrics work best?
Patterned polyester shirts and sportswear, sublimated polyester prone to dye migration, technical and stretchy performance fabrics such as tri-blends, and water-resistant outer layers. These are the fabrics that scorch or bleed under a standard press.
Will it stick to waterproof fabrics?
It bonds to water-resistant fabrics, but not to fabrics that are 100 percent waterproof. For fully waterproof shells, choose a promotional transfer instead.
How does dye-blocking help on sublimated fabrics?
The blocking layer sits between the fabric and the print and helps reduce dye bleed, so colors stay cleaner. It helps prevent migration but cannot guarantee bleeding can never occur.
Do you match brand colors or print metallics?
Yes. Spot-color matching is available so team and brand colors stay consistent, and metallic colors print at no extra cost.
What press settings do I use?
260°F to 270°F for 12 to 15 seconds at 30 to 40 psi medium-firm pressure, then peel hot. Use a higher setting on a manual press. Full steps are on the Application tab.
What press do I need?
An air-operated or manual heat press. A domestic iron, a craft press, or any press without adequate pressure settings will not bond the transfer correctly.
How fast will my order produce?
Production runs 1 to 2 business days. Delivery time depends on location and the shipping method selected at checkout.
What artwork file should I upload?
One completed gang-sheet file sized to the sheet ordered, PDF preferred from vector software. Arrange all designs inside the sheet area, outline all fonts, and keep fine lines at 0.6 pt or heavier. PDF, AI, CDR, and SVG are preferred, and other common formats are accepted.
Still have questions or need a custom order?
Request a Quote
Application
Application & Care
Temperature
260°F to 270°F
Time
12 to 15 seconds
Pressure
30 to 40 psi / medium-firm (use a higher setting on a manual press)
Peel Method
Hot peel
Press Settings
| Setting |
Value |
| Press Temperature |
260°F to 270°F |
| Press Time |
12 to 15 seconds |
| Pressure |
30 to 40 psi / medium-firm (use a higher setting on a manual press) |
| Peel Method |
Hot peel |
| Press Type |
Air-operated or manual heat press |
Step-by-Step Application
-
Prepare the garment. Press the blank first to remove wrinkles and surface moisture. On sublimated or patterned polyester, confirm the fabric is smooth and dry, since moisture encourages dye movement.
-
Place the transfer. Position the transfer printed side up, on top of the fabric and not over a seam. The finished size of the transfer is the finished size of the print.
-
Close the press. Set the platen to 260°F to 270°F and close with medium-firm pressure at 30 to 40 psi. On a manual press, use a higher pressure setting.
-
Hold. Keep the press closed for 12 to 15 seconds. Do not shorten the dwell, because the low-cure adhesive and the blocking layer need the full time to bond at the lower temperature.
-
Peel hot. Open the press and peel the carrier away immediately while the print is still warm, with a slow steady pull at roughly a 180-degree angle.
-
Check the result. Confirm the edges are fully bonded, the fabric shows no scorch or shine, and the colors are clean before continuing with the rest of the run.
Important Precautions
- Use an air-operated or manual heat press, not a domestic iron, a craft press, or any press without adequate pressure settings.
- Do not press on fabrics that are 100 percent waterproof. Use a promotional transfer on those shells.
- Do not press a headwear design across a seam or over mesh; use a headwear-specific transfer for seamed caps.
- When in doubt about scorch or dye stability, press a sample first and check it after cooling before running production.
- Always perform a test press before starting full production. We are not responsible for damaged garments.
Care Instructions
- Wash Cold Inside Out.
- Best if Hang Dry or No Heat if Must Tumble Dry Low Heat.
- Do Not Bleach.
- Do Not Iron Imprint/Transfer.
- Do Not Dry Clean.
- Best Not to use fabric softener.
Always perform a test press before full production to verify adhesion, application settings, and garment compatibility.
Need help with application or choosing the right transfer?
Request a Quote
Shipping
Shipping & Turnaround
Production Time
Production runs 1–2 business days. Delivery time depends on your location and the shipping method selected at checkout.
Shipping Options & Rates
Flat-rate shipping options are available at checkout:
| Shipping Method |
Rate |
| USPS Ground |
$10.95 |
| UPS Ground |
$15.95 |
| FedEx 2Day |
$20.95 |
Final shipping options, eligibility, and charges are determined at checkout.
Free Shipping & Tracking
Free USPS Ground Shipping is available on eligible full-color orders over $125.
Shipping is calculated at checkout, and tracking information is provided when your order ships.
Need a rush order or have special shipping requirements?
Request a Quote
Artwork Requirements
Artwork Requirements
Print-Ready Basics
Prepare your design at the intended finished size for the best printing results. Clean artwork, accurate dimensions, and properly prepared files help preserve detail and color.
- Prepare artwork at the intended finished printing size.
- Use one clearly identified artwork file per design.
- Convert all fonts to outlines or shapes.
- Check spelling, colors, dimensions, and orientation.
- Use transparent backgrounds wherever no printing is intended.
- Include any special design requirements in your order notes.
Accepted File Formats
High-quality PDF files exported from vector artwork are preferred. Other vector and raster formats can also be submitted for review.
- Preferred Format: High-quality PDF
- Vector Formats: AI, EPS, CDR, SVG
- Raster Formats: PSD, PNG, JPG
- Raster Resolution: At least 300 PPI at the finished printing size.
- Linked Images: Embed all linked images in the submitted file.
For designs with transparent areas, PNG or PSD is preferable to JPG. JPG files should only be used when the entire rectangular background is intended to print.
Color & Design Setup
Color preparation depends on the selected transfer type. Use the correct color settings for the printing process and make sure the submitted design represents the intended finished artwork.
- Color Mode: Prepare artwork using CMYK color mode. Pantone color matching is not available for DTF.
- Pantone-Matched Products: Where matching is supported, use official Pantone Solid Coated (C) colors.
- Transparency: Keep non-printing areas transparent and avoid unwanted solid backgrounds.
- Effects: Semi-transparent glows, fades, and shadows may need to be converted into solid-edged artwork.
Minimum Detail & Text Requirements
Fine details should be large enough to reproduce cleanly. Avoid excessively thin free-floating lines and ensure that text and vector effects are prepared correctly.
| Requirement |
Minimum |
| Free-Floating Line Thickness |
0.6 pt / 0.2 mm |
- Convert all editable text to outlines or shapes.
- Embed linked artwork and images.
- Expand pattern fills before submitting vector artwork.
- Keep small design elements clear and avoid excessively fine details.
Before Uploading Your Artwork
- Verify the finished printing dimensions.
- Confirm that the artwork uses the appropriate color setup.
- Check that text has been converted to outlines or shapes.
- Verify that transparent areas will remain unprinted.
- Review fine lines and small design elements.
- Upload the artwork using the product configurator.
- Add important artwork instructions or special requests to your order notes.
If you are unsure whether your artwork is suitable, submit the best available file and explain any concerns in your order notes so the artwork can be reviewed.
Need help preparing your artwork?
Request a Quote
