Description
Full-Color Dye-Blocking Gang Sheet Heat Transfers put multiple designs on one press-ready sheet, with every color included at once. There is no color limit, no weeding, and no stiff edge around the artwork, so detailed logos, gradients, and small text stay clean. A blocking layer under the print helps reduce dye migration into the design, which keeps colors brighter on fabrics that would challenge an ordinary transfer.
The barrier is an invisible layer beneath the color that creates a dye-blocking result. On sublimated polyester, patterned polyester, tri-blends, and other unstable fabrics, dye can reactivate with heat and bleed over time; the barrier sits between the fabric and the print to reduce that bleed, so whites stay cleaner and bright colors stay truer. A white backing under the color keeps artwork vivid on both light and dark garments, and the print stretches and rebounds without cracking through regular wear. Spot-color matching keeps brand and team colors consistent across reorders, and metallic colors are available at no extra cost.
Order a completed gang sheet in one of three sheet sizes: A5 5.8 x 8.3 in, A4 8.3 x 11.7 in, or A3 11.7 x 16.5 in. Arrange your designs inside the sheet you order and upload the finished sheet file. Every sheet presses in a single application, so one sheet can cover a run of garments or a mix of graphics for the same job.
These transfers suit cotton, polycotton blends, fleece, and all polyesters, including sublimated and patterned polyester and tri-blend fabrics that may bleed. That covers tees, hoodies, sportswear, stretchy athleisure wear, denim, and cotton tote bags, with patterned game-day jerseys and sublimated performance wear as the core use case. They are not intended for fabrics with waterproof coatings or specialty fabrics that need a low-temperature press, where a low-melt transfer is the safer choice. Headwear works only where the design does not cross a seam, such as the front of a five-panel cap, and all-over bag coverage suits a promotional transfer instead.
Application takes 10 to 15 seconds at 290°F to 320°F with firm 40 psi pressure, then a hot peel. Use an air-operated or manual heat press, not a domestic iron or a low-pressure craft press, and press a sample first when you change fabrics or settings. Supply one print-ready gang-sheet PDF with fonts outlined and fine lines at 0.6 pt or heavier, and every file is reviewed before printing. Production runs 1 to 2 business days after artwork approval. For full color on difficult polyester across multiple designs on one sheet, this is the format to order.
Pricing
Per-sheet prices below show how unit cost falls as quantity rises. Find your sheet size and quantity, then order in the configurator. It calculates your exact total live, and cart and checkout totals apply. Minimum 10 sheets per design.
| Sheet size |
10 |
20 |
50 |
100 |
200 |
300 |
500 |
1000 |
2500 |
5000+ |
| 5.8 x 8.3 in (A5) |
$7.84 |
$6.71 |
$4.98 |
$3.42 |
$2.77 |
$2.52 |
$2.37 |
$2.25 |
$2.18 |
$2.14 |
| 8.3 x 11.7 in (A4) |
$11.94 |
$10.02 |
$7.85 |
$5.43 |
$4.49 |
$4.12 |
$3.88 |
$3.72 |
$3.63 |
$3.54 |
| 11.7 x 16.5 in (A3) |
$20.26 |
$16.83 |
$13.69 |
$9.56 |
$7.98 |
$7.36 |
$6.97 |
$6.72 |
$6.57 |
$6.43 |
Volume discounts apply automatically. Final totals calculate live in the configurator. For larger quantities, Request a Quote.
Need a larger quantity? Get a custom quote!
Request a Quote
FAQ
Frequently Asked Questions
What is a dye-blocking gang sheet?
A press-ready sheet that holds multiple arranged full-color designs with a built-in dye-blocking layer. You upload one completed sheet file sized to the sheet you order, and the whole sheet presses in one application, with the barrier underneath helping reduce dye bleed into the print.
How do I order a gang sheet?
Choose a sheet size (A5, A4, or A3), set the quantity, upload your completed gang-sheet file, and add any notes in Details and Comments. There is no online builder; arrange your designs before uploading.
What sheet sizes can I order?
Three sheet sizes: A5 5.8 x 8.3 in, A4 8.3 x 11.7 in, and A3 11.7 x 16.5 in. The largest covers a full front or back panel area.
What is the minimum order?
10 sheets per design. For fewer than 10, use a no-minimum format instead.
How does quantity pricing work?
Order the quantity of sheets you need. Unit cost steps down at 20, 50, 100, 200, 300, 500, 1000, 2500, and 5000 sheets, so larger runs cost less per sheet. Final totals calculate live in the configurator.
Which fabrics work best?
Cotton, polycotton blends, fleece, and all polyesters, including sublimated and patterned polyester and tri-blends. In practice, that covers tees, hoodies, sportswear, stretchy athleisure wear, denim, and cotton tote bags, with patterned jerseys and sublimated performance wear as the core use case.
Which fabrics should I avoid?
Avoid fabrics with waterproof coatings and specialty fabrics that need a low-temperature press. A low-melt transfer is the safer choice there.
Can I use it on caps or tote bags?
Cotton tote bags press well. Caps work only where the design does not cross a seam, such as the front of a five-panel cap. For seams or mesh, use a headwear-specific transfer, and for all-over bag coverage, use a promotional transfer.
Do you match brand colors or print metallics?
Yes. Spot-color matching is available so team and brand colors stay consistent, and metallic colors print at no extra cost.
What press settings do I use?
290°F to 320°F for 10 to 15 seconds at 40 psi firm, then peel hot. Use a higher setting on a manual press. Full steps are on the Application tab.
What press do I need?
An air-operated or manual heat press. A domestic iron or a low-pressure craft press will not bond the transfer correctly.
How durable is the print?
Independently tested to 80+ washes before fading or cracking, with water-based inks and certified materials.
How fast will my order produce?
Production runs 1 to 2 business days after artwork approval. Delivery time depends on location and the shipping method selected at checkout.
What artwork file should I upload?
One completed gang-sheet file sized to the sheet ordered, PDF preferred from vector software. Arrange all designs inside the sheet area, outline all fonts, and keep fine lines at 0.6 pt or heavier. PDF, AI, CDR, and SVG are preferred, and other common formats are accepted. There is no online builder.
Still have questions or need a custom order?
Request a Quote
Application
Application & Care
Temperature
290°F to 320°F
Time
10 to 15 seconds
Pressure
40 psi / firm (use a higher setting on a manual press)
Peel Method
Hot peel
Press Settings
| Setting |
Value |
| Press Temperature |
290°F to 320°F |
| Press Time |
10 to 15 seconds |
| Pressure |
40 psi / firm (use a higher setting on a manual press) |
| Peel Method |
Hot peel |
| Press Type |
Air-operated or manual heat press |
Step-by-Step Application
-
Prepare the garment. Press the blank first to remove wrinkles and surface moisture. On sublimated polyester, confirm the fabric is smooth and dry, since moisture encourages dye movement.
-
Place the transfer. Position the transfer printed side up, on top of the fabric and not over a seam. The finished size of the transfer is the finished size of the print.
-
Close the press. Set the platen to 290°F to 320°F and close with firm pressure at 40 psi. On a manual press, use a higher pressure setting.
-
Hold. Keep the press closed for 10 to 15 seconds. Do not shorten the dwell, because the adhesive and the blocking layer need the full heat and time to bond.
-
Peel hot. Open the press and peel the carrier away immediately while the print is still warm, with a slow steady pull at roughly a 180-degree angle.
-
Check the result. Confirm the edges are fully bonded and the colors are clean before continuing with the rest of the run.
Important Precautions
- Use an air-operated or manual heat press, not a domestic iron or a low-pressure craft press.
- Do not press on fabrics with waterproof coatings or specialty fabrics that need a low-temperature press. Use a low-melt transfer on those fabrics.
- Do not press a headwear design across a seam or over mesh.
- When in doubt about dye stability, press a sample first and check it after cooling before running production.
- Always perform a test press before starting full production. We are not responsible for damaged garments.
Care Instructions
- Wash Cold Inside Out.
- Best if Hang Dry or No Heat if Must Tumble Dry Low Heat.
- Do Not Bleach.
- Do Not Iron Imprint/Transfer.
- Do Not Dry Clean.
- Best Not to use fabric softener.
Always perform a test press before full production to verify adhesion, application settings, and garment compatibility.
Need help with application or choosing the right transfer?
Request a Quote
Shipping
Shipping & Turnaround
Production Time
Production runs 1–2 business days. Delivery time depends on your location and the shipping method selected at checkout.
Shipping Options & Rates
Flat-rate shipping options are available at checkout:
| Shipping Method |
Rate |
| USPS Ground |
$10.95 |
| UPS Ground |
$15.95 |
| FedEx 2Day |
$20.95 |
Final shipping options, eligibility, and charges are determined at checkout.
Free Shipping & Tracking
Free USPS Ground Shipping is available on eligible full-color orders over $125.
Shipping is calculated at checkout, and tracking information is provided when your order ships.
Need a rush order or have special shipping requirements?
Request a Quote
Artwork Requirements
Artwork Requirements
Print-Ready Basics
Prepare your design at the intended finished size for the best printing results. Clean artwork, accurate dimensions, and properly prepared files help preserve detail and color.
- Prepare artwork at the intended finished printing size.
- Use one clearly identified artwork file per design.
- Convert all fonts to outlines or shapes.
- Check spelling, colors, dimensions, and orientation.
- Use transparent backgrounds wherever no printing is intended.
- Include any special design requirements in your order notes.
Accepted File Formats
High-quality PDF files exported from vector artwork are preferred. Other vector and raster formats can also be submitted for review.
- Preferred Format: High-quality PDF
- Vector Formats: AI, EPS, CDR, SVG
- Raster Formats: PSD, PNG, JPG
- Raster Resolution: At least 300 PPI at the finished printing size.
- Linked Images: Embed all linked images in the submitted file.
For designs with transparent areas, PNG or PSD is preferable to JPG. JPG files should only be used when the entire rectangular background is intended to print.
Color & Design Setup
Color preparation depends on the selected transfer type. Use the correct color settings for the printing process and make sure the submitted design represents the intended finished artwork.
- Color Mode: Prepare artwork using CMYK color mode. Pantone color matching is not available for DTF.
- Pantone-Matched Products: Where matching is supported, use official Pantone Solid Coated (C) colors.
- Transparency: Keep non-printing areas transparent and avoid unwanted solid backgrounds.
- Effects: Semi-transparent glows, fades, and shadows may need to be converted into solid-edged artwork.
Minimum Detail & Text Requirements
Fine details should be large enough to reproduce cleanly. Avoid excessively thin free-floating lines and ensure that text and vector effects are prepared correctly.
| Requirement |
Minimum |
| Free-Floating Line Thickness |
0.6 pt / 0.2 mm |
- Convert all editable text to outlines or shapes.
- Embed linked artwork and images.
- Expand pattern fills before submitting vector artwork.
- Keep small design elements clear and avoid excessively fine details.
Before Uploading Your Artwork
- Verify the finished printing dimensions.
- Confirm that the artwork uses the appropriate color setup.
- Check that text has been converted to outlines or shapes.
- Verify that transparent areas will remain unprinted.
- Review fine lines and small design elements.
- Upload the artwork using the product configurator.
- Add important artwork instructions or special requests to your order notes.
If you are unsure whether your artwork is suitable, submit the best available file and explain any concerns in your order notes so the artwork can be reviewed.
Need help preparing your artwork?
Request a Quote
